Product Description
Model & Specification Description:
Introduction:
Purified water will generate secondary steam heated by the steam in the boiler in the generator, and the toxin and bacteria in it will be removed, the resulting steam is called pure steam for short.
Pure steam generator is widely applicable for the sterilizing and disinfecting of pipes and storing tanks in pharmaceutical, foods, beverage industries.
LCZ series pure steam generator is mainly used for the disinfection and sterilization in the pipes, containers and other equipments of pharmaceuticals, medical treatment sanitation, biological and food industry. It is an important part of big transfusion production line. It can effectively avoid the substance repollution caused by the impurities such as heavy metal progon and so on. Besides, it meets the GMP and CGMP demands.
The technical requirements of the machine meet the JB20031-2004 pure steam generator pharmaceutical machinery industry standards.
The condensed water, cooling from the pure steam, shall meet all the quality standards of water for injection of Chinese Pharmacopoeia 2020.
A condenser can be selected and used for the production of water for inspection and can have the following characteristics:
1. The output is increased from 50L/h to 2000L/h.
2. During the condensing process, the generated water for injection complies with the US-(USP), European-(EP) and other pharmacy specifications.
3. The pure steam with high quality can be ensured by the separation system.
4. The overflowing part is made of stainless steel 316L and the other part is made of SS304.
5. Complete verification supporting document system.
Working Principle:
The equipment has 3 parts, evaporator, preheater and electric automatic control. The evaporator is adopted the special separating way: membrane evaporation + gravity sedimentation + wire despumation.
The qualified raw water is input into the preheater after increased the pressure by multilevel pump, and then passed through the flow meter. After heating exchange, the temperature is lower 10-15 than the temperature of heating steam water in evaporator. Next the raw water is input into the raw water distributor of the evaporator, which is spouted to the inside of the heating tubes. So that the raw water in the tube is flowed as membrane. Then the raw water is became the second steam with drip, which is boiloff by boiler steam. The steam is entered into the third grade separating setting from bottom of the heating tube, after separation, it is produced the ultra-pure pyrogen-free steam. It can be online inspected the conductivity of the pure steam condensate water, so it can be inspected that whether the pure steam is qualified. In the evaporator, the boiler steam is absorbed by raw water, and then it is condensed into condensed water as heating for pre-heater. And the preheated raw water is drained from incondensable outlet of pre-heater.
Main Technical Data Table:
| Specification |
Steam Pressure
(Mpa) |
Pure Steam Output
(L/h) |
Industrial Steam Consumption (L/h) |
Purified Water Consumption (L/h) |
Pure Steam Pressure
(Mpa) |
Dimension
L* W* H
(mm) |
| LCZ-50 |
0.4 |
50 |
65 |
63 |
0.3 |
700* 900* 2500 |
| LCZ-100 |
0.4 |
100 |
130 |
125 |
0.3 |
700* 900* 2500 |
| LCZ-200 |
0.4 |
200 |
260 |
250 |
0.3 |
700* 1000* 2700 |
| LCZ-300 |
0.4 |
300 |
390 |
375 |
0.3 |
800* 1100* 2800 |
| LCZ-400 |
0.4 |
400 |
520 |
500 |
0.3 |
800* 1200* 3000 |
| LCZ-500 |
0.4 |
500 |
650 |
625 |
0.3 |
800* 1300* 3100 |
| LCZ-600 |
0.4 |
600 |
780 |
750 |
0.3 |
900*1300*3100 |
| LCZ-700 |
0.4 |
700 |
910 |
875 |
0.3 |
900*1300*3100 |
| LCZ-800 |
0.4 |
800 |
1040 |
1000 |
0.3 |
1000*1300*3200 |
| LCZ-900 |
0.4 |
900 |
1170 |
1125 |
0.3 |
1000*1300*3200 |
| LCZ-1000 |
0.4 |
1000 |
1300 |
1250 |
0.3 |
1200*1300*3200 |
| LCZ-1200 |
0.4 |
1200 |
1560 |
1500 |
0.3 |
2200*1300*2800 |
| LCZ-1500 |
0.4 |
1500 |
1950 |
1875 |
0.3 |
1400*1300*3200 |
| LCZ-2000 |
0.4 |
2000 |
2600 |
2500 |
0.3 |
1400*1300*3200 |
Detailed Photos
1. Are you a factory?
Yes, we are a factory with about 20 years' manufacturing experience since our foundation year 2004.
Our factory is in Yangzhou, Jiangsu Province, China.
2. What about the delivery time?
Usually 30~45 working days.
3. The after-sale service
Provide guide videos and online support to help debug machines, and train buyer's related staff to install, operate and maintain the machine. When necessary, we can also send our technician to your factory.
4. If I want to buy a machine, what information do I need to tell you?
a. What kind of source water do you need to purify?
b. Raw water quality analysis report (If no, talk to our foreign trade salesman)
c. Hourly producing capacity requirement. How much liters per hour(L/h)?
d. Working condition
e. Treated-water quality requirement.
5. What kinds of products do you supply?
Multiple Effect Distilled Water Machine
Pure Steam Generator
Reverse Osmosis(RO) Purified Water System
EDI Desalination System
Ultrafiltration(UF) System
Stainless Steel Tank Products
Heat Exchanger
CIP/SIP System
Water Distribution System Process Loop Pipeline
Water Treatment Accessories
){kind=link}